W dystrybucjach opartych na Debianie 12 (LMDE 6 i MX Linux 23.6) skanuje bez problemów, natomiast pod "Trixie" (Sparky 8 Cinnamon, Sparky 8 Xfce, LMDE 7) są te same błędy - po zeskanowaniu jednej strony komunikat "skanowanie nie powiodło się" i możliwość zapisania dokumentu tylko jak pdf (jpg nie). Nie pomaga reinstalacja bibliotek, CUPS, HPLIP i pluginu.
$ simple-scan
(simple-scan:5362): Gtk-WARNING **: 00:59:13.759: Trying to measure GtkLabel 0x5616b5782e50 for width of 324, but it needs at least 326
(simple-scan:5362): Gtk-WARNING **: 00:59:13.759: Trying to measure GtkLabel 0x5616b5782e50 for width of 252, but it needs at least 326
(simple-scan:5362): Gtk-WARNING **: 00:59:13.760: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.766: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.774: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.777: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.797: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.798: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.848: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:13.849: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.123: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.124: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.163: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.165: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.179: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.180: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.289: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.290: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.334: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.335: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.367: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.368: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.382: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.383: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.403: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.404: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.419: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.420: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.429: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.430: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.447: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.448: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.463: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.464: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.480: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.481: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.496: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.497: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.513: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.514: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.530: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.531: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.546: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.547: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.563: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.564: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.581: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.582: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.597: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.597: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.614: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.615: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.629: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.630: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.650: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.650: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.664: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.665: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.681: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.681: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.697: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.698: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.713: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.714: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.730: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.731: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.747: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.748: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.764: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.765: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.780: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.781: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.797: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.798: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.813: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.814: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.830: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:15.831: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.045: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.047: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.056: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.057: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.068: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.069: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.080: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.080: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.096: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.097: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.113: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.114: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.130: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.131: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.147: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.148: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.163: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.165: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.180: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.181: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.196: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.197: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.213: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.214: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.230: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:16.231: Trying to measure AdwMessageDialog 0x5616b449f0b0 for height of 170, but it needs at least 173
(simple-scan:5362): Gtk-WARNING **: 00:59:31.576: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 252, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.577: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 100, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.578: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 248, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.578: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 546, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.578: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 397, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.579: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 251, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.579: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 250, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.579: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 249, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.581: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 26, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 175, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 138, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 119, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 129, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 134, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 132, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.583: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 131, but it needs at least 571
(simple-scan:5362): Gtk-WARNING **: 00:59:31.584: Trying to measure GtkLabel 0x5616b5a0b5e0 for width of 130, but it needs at least 571
$ scanimage > image.pnm
Output format is not set, using pnm as a default.
scanimage: rounded value of br-x from 216 to 216
scanimage: rounded value of br-y from 297 to 297
scanimage: sane_read: Error during device I/O
$ scanimage --list-devices
device `hpljm1005:libusb:001:006' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
$ hp-doctor
HP Linux Imaging and Printing System (ver. 3.22.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.22.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: sparky distro is not found in AUTH_TYPES
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility
Checking for Dependencies....
warning: ark-8.0 version is not supported. Using ark-any versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.12.48+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.48-1 (2025-09-20) GNU/Linux
Host: computer
Proc: 6.12.48+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.48-1 (2025-09-20) GNU/Linux
Distribution: ark 8.0
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.22.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for ark distro 8.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.22.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.22.10
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 10/20/25 01:15:16
version = 3.22.10
[last_used]
device_uri = "hp:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB"
printer_name =
working_dir = /home/userm/Pobrane/hplip-3.22.10-plugin.run
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1760910637
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 10.05.1 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.2.1 OK -
dbus DBus - Message bus system REQUIRED - 1.16.2 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - - OK -
network network -wget OPTIONAL - 1.25.0 OK -
error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed'
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.41' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.5.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.13.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.4.0 OK -
python3-xml Python XML libraries REQUIRED - 2.7.1 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.13.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 11.1.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 4.3.1 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 14.2.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.22.10 OK -
hpmudext IO-Extension REQUIRED - 3.22.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.22.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.22.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpljm1005:libusb:001:007' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
device `hpljm1005:libusb:001:007' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------------------- --------------------------------------
hp:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB HP LaserJet M1120 MFP
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-LaserJet-M1120-MFP
---------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB
PPD: /etc/cups/ppd/HP-LaserJet-M1120-MFP.ppd
PPD Description: HP LaserJet M1120 MFP Foomatic/foo2xqx (recommended)
Printer status: printer HP-LaserJet-M1120-MFP is idle. enabled since pon, 20 paź 2025, 00:00:41
Required plug-in status: Installed
Communication status: Good
--------------
| PERMISSION |
--------------
USB HP-LaserJet-M1120-MFP Required - - OK Node:'/dev/bus/usb/001/007' Perm:' root lp rw- rw- rw- rw- rw- r--'
Checking Permissions....
Checking for Configured Queues....
Traceback (most recent call last):
File "/usr/bin/hp-doctor", line 328, in <module>
queues.main_function(dep.core.passwordObj, MODE,ui_toolkit, False, DEVICE_URI)
~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/share/hplip/base/queues.py", line 337, in main_function
mapofDevices,status = parseQueues(mode)
~~~~~~~~~~~^^^^^^
File "/usr/share/hplip/base/queues.py", line 114, in parseQueues
if device_uri.startswith("cups-pdf:/"):
^^^^^^^^^^^^^^^^^^^^^
AttributeError: 'NoneType' object has no attribute 'startswith'
A próbowałeś xsane? Bo mnie to wygląda na jakieś problemy z formatem, ale to tylko przypuszczenia. Nie mam doświadczenia ze scanimage, używam właśnie xsane.
@John Doe W tym logu który podałeś jasno pisze że wersja cups którą posiadasz jest niekompatybilna.
Cytaterror: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
A rozwiązanie tego to zbudowanie cups z kodu źródłowego wraz z bibliotekami.
Tu poradnik:https://www.linuxfromscratch.org/blfs/view/svn/pst/cups.html
Musisz wypakować wszystkie pliki na pulpit wraz z katalogiem i wybrać otwórz w terminalu w sensie ten katalog
Potrzebne zależności zainstalujesz przez: sudo apt build-dep cups a potem ./configure i sudo make install
To najnowsza wersja cups zaś co do hplip to pobierz najnowszy:https://sourceforge.net/projects/hplip/files/hplip/3.25.6/hplip-3.25.6.tar.gz/download i oczywiście musisz w systemie mieć zainstalowany Python3
Przez sudo apt install python3
Po pobraniu tego archiwum wybrać musisz wypakować wszystkie pliki wraz z katalogiem na Pulpit
Oraz postępować według tego poradnika: https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/lfs
Cytat: mirekc w Październik 20, 2025, 07:44:32 AMA próbowałeś xsane? Bo mnie to wygląda na jakieś problemy z formatem, ale to tylko przypuszczenia. Nie mam doświadczenia ze scanimage, używam właśnie xsane.
Próbowałem - te same błędy.
Cytat: linux4ever w Październik 20, 2025, 08:06:18 AM@John Doe W tym logu który podałeś jasno pisze że wersja cups którą posiadasz jest niekompatybilna.
Cytaterror: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
A rozwiązanie tego to zbudowanie cups z kodu źródłowego wraz z bibliotekami.
Tu poradnik:https://www.linuxfromscratch.org/blfs/view/svn/pst/cups.html
Musisz wypakować wszystkie pliki na pulpit wraz z katalogiem i wybrać otwórz w terminalu w sensie ten katalog
Potrzebne zależności zainstalujesz przez: sudo apt build-dep cups a potem ./configure i sudo make install
To najnowsza wersja cups zaś co do hplip to pobierz najnowszy:https://sourceforge.net/projects/hplip/files/hplip/3.25.6/hplip-3.25.6.tar.gz/download i oczywiście musisz w systemie mieć zainstalowany Python3
Przez sudo apt install python3
Po pobraniu tego archiwum wybrać musisz wypakować wszystkie pliki wraz z katalogiem na Pulpit
Oraz postępować według tego poradnika: https://developers.hp.com/hp-linux-imaging-and-printing/install/manual/distros/lfs
Pod MX linux 23.6 skanowanie bez błędów, a hp-doctor też podaje INCOMPAT 'CUPS may not be installed or not running'
$ hp-doctor
HP Linux Imaging and Printing System (ver. 3.22.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.22.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility
Checking for Dependencies....
warning: debian-12 version is not supported. Using debian-11 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.1.0-39-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.148-1 (2025-08-26) GNU/Linux
Host: computer
Proc: 6.1.0-39-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.148-1 (2025-08-26) GNU/Linux
Distribution: debian 12
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.22.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 12 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.22.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 10/20/25 21:03:31
version = 3.22.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 10.00.0 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.1.1 OK -
error: dbus DBus - Message bus system REQUIRED - 1.14.10 MISSING 'DBUS may not be installed or not running'
error: policykit PolicyKit - Administrative policy framework OPTIONAL - - MISSING 'policykit needs to be installed'
network network -wget OPTIONAL - 1.21.3 OK -
error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed'
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
libpthread libpthread - POSIX threads library REQUIRED - b'2.36' OK -
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.0.17 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.11.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.3.2 OK -
python3-xml Python XML libraries REQUIRED - 2.5.0 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.11.2 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 9.4.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.6.12 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 12.2.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.22.10 OK -
hpmudext IO-Extension REQUIRED - 3.22.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.22.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.22.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpljm1005:libusb:001:006' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
---------------------------------------- ---------------------
hp:/usb/HP_LaserJet_M1120_MFP?serial=MF3 HP LaserJet M1120 MFP
4RZB
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: No destinations added.
--------------
| PERMISSION |
--------------
USB None Required - - OK Node:'/dev/bus/usb/001/006' Perm:' root lp rw- rw- rw- rw- rw- r--'
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing or 'cups' service is not running.
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libjpeg62-turbo-dev' package is missing/incompatible
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2-dev' package is missing or 'cups' service is not running.
error: 'cups-bsd' package is missing or 'cups' service is not running.
error: 'cups-client' package is missing or 'cups' service is not running.
error: 'libcupsimage2' package is missing or 'cups' service is not running.
error: 'libcupsimage2-dev' package is missing or 'cups' service is not running.
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libavahi-client-dev' package is missing/incompatible
error: 'libavahi-core-dev' package is missing/incompatible
error: 'libavahi-common-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
error: 'snmp' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
error: 'python3-dev' package is missing/incompatible
error: 'libtool' package is missing/incompatible
error: 'libtool-bin' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible
error: 'policykit-1' package is missing/incompatible
error: 'policykit-1-gnome' package is missing/incompatible
error: 'avahi-utils' package is missing/incompatible
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password:
Checking Permissions....
Checking for Configured Queues....
No Queue added
warning: No Queue(s) configured.
Checking for HP Properitery Plugin's....
No plug-in printers are configured.
Diagnose completed...
More information on Troubleshooting,How-To's and Support is available on http://hplipopensource.com/hplip-web/index.html
Te dwa komunikaty są tylko w systemach gdzie występuje błąd:
$ simple-scan -d
[+0,09s] CRITICAL: g_application_set_application_id: assertion 'application_id == NULL || g_application_id_is_valid (application_id)' failed
[+41,51s] WARNING: scanner.vala:1502: Unable to read frame from device: Error during device I/O
Częściowo rozwiązuje problem uruchomienie "Skanera dokumentów" komendą simple-scan hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZBPo zeskanowaniu każdej strony jest komunikat "Skanowanie nie powiodło się - Zamknij". Komunikat da się zamknąć, skanować kolejne strony i całość zapisać jako jpg albo pdf.
Jak wyłączyć te komunikaty? W pomocy simple-scan [OPCJA...] [URZĄDZENIE...] Jaką opcją wyłączyć?
Z nowszymi wersjami pakietów też jest błąd. Sprawdziłem pod Fedorą 43 (CUPS 2.4.14-2, HPLIP 3.25.6-1, SANE 1.4.0-2).
@John Doe Zobacz pod Devuanem: https://www.devuan.org/os/install Devuan 4.0 działa pod ventoy.
I powinny działać pod Mintem jak nie działa na Debianie.
1. CUPS nie ma nic wspólnego ze skanowanie. To system druku, a nie skanu.
2. Pokaż (przy podłączonym skanerze) wynik:
scanimage -Lzarówno ze zwykłego usera, jak i z roota.
3. Pytanie - skanowanie przez usb, czy przez wifi?
$ scanimage -L
device `hpljm1005:libusb:001:008' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
# scanimage -L
device `hpljm1005:libusb:001:008' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
Skanowanie przez USB. Urządzenie nie ma Wi-Fi.
Możesz napisać jak (skąd) instalowałeś HPLIP oraz czy masz zainstalowane do niego wszystkie - przynajmniej te istotne - zależności (raczej mi to nie wynika z Twoich postów).
Skan się zawsze wysypuje po jednej stronie? Ona jest prawidłowo zeskanowana?
Pod live Devuan 6 Excalibur skanuje bez błędów, Xsane i Simple Scan. Jest prawie ten sam zestaw pakietów, zależności są spełnione. HPLIP z repozytoriów Sparky stable (czyli Debiana) przez Synaptic. Strona jest prawidłowo zeskanowana, ale po zeskanowaniu każdej strony jest komunikat o błędzie.
Screeny Synaptica (Sparky / Devuan)hp-doctor pod Devuanem
devuan@devuan:~$ scanimage > image.pnm
Output format is not set, using pnm as a default.
scanimage: open of device hpljm1005:libusb:001:008 failed: Device busy
devuan@devuan:~$ hp-doctor
HP Linux Imaging and Printing System (ver. 3.22.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
HP Linux Imaging and Printing System (ver. 3.22.10)
Self Diagnse Utility and Healing Utility ver. 1.0
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
warning: devuan distro is not found in AUTH_TYPES
Checking for Deprecated items....
No Deprecated items are found
Checking for HPLIP updates....
error: Failed to locate hp-upgrade utility
Checking for Dependencies....
warning: unknown-6 version is not supported. Using unknown-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.12.48+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.48-1 (2025-09-20) GNU/Linux
Host: devuan
Proc: 6.12.48+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.48-1 (2025-09-20) GNU/Linux
Distribution: unknown 6
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.22.10
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro 6 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.22.10
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.22.10
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.22.10
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 11/03/25 16:52:52
version = 3.22.10
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 10.05.1 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.2.1 OK -
error: dbus DBus - Message bus system REQUIRED - 1.16.2 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - - OK -
network network -wget OPTIONAL - 1.25.0 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed'
error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed'
error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed'
error: libpthread libpthread - POSIX threads library REQUIRED - b'2.41' MISSING 'libpthread needs to be installed'
error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane SANE - Scanning library REQUIRED - - OK -
error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed'
error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed'
error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.5.1 MISSING 'libcrypto needs to be installed'
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.13.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.4.0 OK -
python3-xml Python XML libraries REQUIRED - 2.7.1 OK -
error: python3-devel Python devel - Python development files REQUIRED 2.2 3.13.5 MISSING 'python3-devel needs to be installed'
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 11.1.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 4.3.1 OK -
--------------
| COMPILEDEP |
--------------
error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed'
error: gcc gcc - GNU Project C and C++ Compiler REQUIRED - - MISSING 'gcc needs to be installed'
error: make make - GNU make utility to maintain groups of programs REQUIRED 3.0 - MISSING 'make needs to be installed'
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.22.10 OK -
hpmudext IO-Extension REQUIRED - 3.22.10 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.22.10 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.22.10 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `hpljm1005:libusb:001:008' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
device `hpljm1005:libusb:001:008' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ---------------------
hp:/usb/HP_LaserJet_M1120_MFP?se HP LaserJet M1120 MFP
rial=MF34RZB
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_LaserJet_M1120_MFP
---------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB
PPD: /etc/cups/ppd/HP_LaserJet_M1120_MFP.ppd
warning: Failed to read /etc/cups/ppd/HP_LaserJet_M1120_MFP.ppd ppd file
PPD Description:
Printer status: printer HP_LaserJet_M1120_MFP is idle. enabled since Mon 03 Nov 2025 04:42:36 PM UTC
Required plug-in status: Installed
Communication status: Good
--------------
| PERMISSION |
--------------
USB HP_LaserJet_M1120_MFP Required - - OK Node:'/dev/bus/usb/001/008' Perm:' root lp rw- rw- rw- rw- rw- r--'
Checking Permissions....
Checking for Configured Queues....
Traceback (most recent call last):
File "/usr/bin/hp-doctor", line 328, in <module>
queues.main_function(dep.core.passwordObj, MODE,ui_toolkit, False, DEVICE_URI)
~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/share/hplip/base/queues.py", line 337, in main_function
mapofDevices,status = parseQueues(mode)
~~~~~~~~~~~^^^^^^
File "/usr/share/hplip/base/queues.py", line 114, in parseQueues
if device_uri.startswith("cups-pdf:/"):
^^^^^^^^^^^^^^^^^^^^^
AttributeError: 'NoneType' object has no attribute 'startswith'
devuan@devuan:~$
Zależności są nieco inne, ale tu chyba nie jest problem. Zerknij może na:
znalezione w sieci lub
następne.
Może to jakieś naprowadzenie.
Cytat: John Doe w Listopad 02, 2025, 11:28:31 PM$ scanimage -L
device `hpljm1005:libusb:001:008' is a Hewlett-Packard LaserJet M1120 multi-function peripheral
device `hpaio:/usb/HP_LaserJet_M1120_MFP?serial=MF34RZB' is a Hewlett-Packard HP_LaserJet_M1120_MFP all-in-one
Internet mówi, że powinieneś użyć tylko hpaio, zamiast hpljm1005
Tu może być problem w posiadaniu dwóch sterowników...
🤔
W preferencjach Simple Scan zaznaczyłem:
Skanowanie stron - Przód
Opóźnienie w sekundach - 3
I działa bez błędów.
Dziękuję wszystkim za pomoc, szczególnie pavbaranov - naprowadzenie pomogło.