Linuxiarze.pl Forum

Dystrybucje Linux => Ubuntu, Kubuntu, Xubuntu, Lubuntu => Wątek zaczęty przez: uacc w Maj 29, 2016, 05:13:20 PM

Tytuł: komputer nie widzi skanera
Wiadomość wysłana przez: uacc w Maj 29, 2016, 05:13:20 PM
Wtam
mój laptop: lenovo R500 thinkpad, system : linux ubuntu mate , drukarka -  skaner: brother dcp-7060d
drukowanie działa, jak probuje zeskanowac dokument, to drukarka[scaner] nie widzi komputera i odwrotnie jak uruchamiam skanowanie z dostepnych programow to jest komunikat ze urzadzenie jest niedostepne. Porszę o pomoc
Tytuł: Odp: komputer nie widzi skanera
Wiadomość wysłana przez: pavroo w Maj 30, 2016, 01:15:57 AM
Witaj
Mam ten sam problem.
Podłącz skaner do kompa, włącz zasilanie i podaj wynik polecenia:
lsusb

p.s.
Zainstalowałeś sterowniki ze strony producenta?
Tytuł: Odp: komputer nie widzi skanera
Wiadomość wysłana przez: Albedo 0.64 w Maj 31, 2016, 09:30:49 PM
Witajcie. Ja wybrałem Brothera ze względu na niskie koszty eksploatacji i dostępność sterowników. Do brother dcp-7060d sterowniki są tu: http://support.brother.com/g/b/downloadlist.aspx?c=pl&lang=pl&prod=dcp7060d_all&os=128&flang=English
Instalacja sterowników nie jest taka oczywista jak się wydaje. Mimo dostępności paczek deb należy instalować przez terminal. Dlatego trzeba pobrać wszystkie dostepne paczki, w tym Driver Install Tool. Wklejam wam instrukcję instalacji, powinna być uniwersalna dla modeli Brothera. Po prawidłowej instalacji działa skaner i drukarka. Można bez problemu sterować urządzeniem z poziomu GIMP-a, SANE i innych programów graficznych (ja uzywam jeszcze XnViewMP).

Instrukcja instalacji sterowników Brother:

How to Install driver install tool

Step1. Download the tool.(linux-brprinter-installer-*.*.*-*.gz)

The tool will be downloaded into the default "Download" directory.
(The directory location varies depending on your Linux distribution.)
e.g. /home/(LoginName)/Download

Step2. Open a terminal window and go to the directory you downloaded the file to in the last step.

Step3. Enter this command to extract the downloaded file:

Command: gunzip linux-brprinter-installer-*.*.*-*.gz

Step4. Get superuser authorization with the "su" command or "sudo su" command.

Step5. Run the tool:

Command: bash linux-brprinter-installer-*.*.*-* Brother machine name

Step6. The driver installation will start. Follow the installation screen directions.


When you see the message "Will you specify the DeviceURI ?",

For USB Users: Choose N(No)
For Network Users: Choose Y(Yes) and DeviceURI.

The install process may take some time. Please wait until it is complete.

How to Install LPR driver (deb package)

    Download LPR driver.
     
    Login as a superuser ( or use "sudo" option if required).
     
    Check if pre-required procedures are completed
    For Debian/Ubuntu 64bit
     
    Install the driver.
        Turn on the printer and connect the usb, network or parallel cable.
        Go to the directory where the driver is.
        Install LPR driver.The install process may take some time. Please wait until it is complete.
        Command  :  dpkg -i --force-all  (lpr-drivername)
        Check if the LPR driver is installed.
        Command  :  dpkg -l  |  grep  Brother
         
    Confirm/Configure a file according to your connection.

     
        Check the configuration filename for your distribution.
        Example:
        openSUSE, Ubuntu, Debian : /etc/printcap
        Redhat, fedora, Mandriva : /etc/printcap.local
         
        Edit the file according to your connection.
        For USB Connection (Default)
        Check if the parameter of ":lp" is ":lp=/dev/usb/lp0"
        For Network Connection
        replace ":lp" line to the following 2 lines
        :rm=(ip address of your printer)\
        :rp=lp\
        For Parallel Connection
        replace ":lp" line to the following line
        :lp=/dev/lp0\
         
        Restart the print system.
        Command  (for  lpr):  /etc/init.d/lpr  restart
        Command  (for  lprng)  :  /etc/init.d/lprng  restart
         
    Try a test print.

How to Install CUPSwrapper printer driver (deb package)

    Login as a superuser ( or use "sudo" option if it is required )
     
    Check if pre-required procedures are completed
    For Debian/Ubuntu 64 bit
    For Ubuntu8.04 or greater
     
    Download drivers
    Download LPR driver and cupswrapper driver.
     
    Install LPR driver and cupswrapper driver
        Turn on the printer and connect the USB cable.
        Open the terminal and go to the directory where the drivers are.
        Install LPR driver.The install process may take some time. Please wait until it is complete.
        Command (for dpkg)  :  dpkg  -i  --force-all  (lpr-drivername)
         
        Install cupswrapper driver.The install process may take some time. Please wait until it is complete.
        Command (for dpkg)  :  dpkg  -i  --force-all  (cupswrapper-drivername)
         
        Check if the LPR driver and cupswrapper driver are installed
        Command (for dpkg)  :  dpkg  -l  |  grep  Brother
         
    Depending on the connection type you are using (USB or Network), follow one of the steps below.

    (for USB Connection)
        Open a web browser and go to "http://localhost:631/printers".
        Check if the Device URI of your printer is "usb://Brother/(your printer's model name)"

        If the device URI is different from the example above, please go to "Modify Printer" of your printer to select proper device and driver.
        If your printer is not listed on "http://localhost:631/printers", please go to "http://localhost:631/admin" and click "Add printer" and select proper device and driver.

     
    (for Network Connection)

     
        Open a web browser and go to "http://localhost:631/printers".
        Click "Modify Printer" and set following parameters.
        - "LPD/LPR Host or Printer" or "AppSocket/HP JetDirect"            for Device
        - lpd://(Your printer's IP address)/binary_p1            for Device URI
        - Brother            for Make/Manufacturer Selection
        - Your printer's name            for Model/Driver Selection
    Try a test print
    Open a text editor, write something and select "print" from the menu.

Do prawidłowego działania skanera należy dodać użytkownika do grupy lp i lpadmin.
p.s. na wszelki wypadek dopisuję, że w miejsce "*.*.*-*" należy wpisać nazwę posiadanej drukarki (np, dcp-j105).