Hej mam problem mam laptop na którym jest linux i mam dysk spoza laptopem HDD który podłanczam do komputra i chce przeprowadzić test smart zainstalowałem poleceniem apt-get -install smartmontools probuje wykonywac przy pomocy smartctl sprawdzenie smartu wynik chce otrzymać taki jak w przypadku parametru -H ale no nie wychodzi oto komunikaty i dane proszę o pomoc co robię źle i doradzenie ps. jestem laikiem w tej dziedzinie więc proszę o wyrozumiałość pozdrawiam!
Tutaj to co próbowałem robić i komunikaty, które dostawałem
"root@debian:/mnt# fdisk -l
Dysk /dev/sda: 119,2 GiB, bajtów: 128035676160, sektorów: 250069680
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Typ etykiety dysku: dos
Identyfikator dysku: 0xe2a14da0
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 239855615 239853568 114,4G 83 Linux
/dev/sda2 239857662 250068991 10211330 4,9G 5 Extended
/dev/sda5 239857664 250068991 10211328 4,9G 82 Linux swap / Solaris
Dysk /dev/sdb: 1,8 TiB, bajtów: 2000398934016, sektorów: 3907029168
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Typ etykiety dysku: dos
Identyfikator dysku: 0x01c7436c
Device Boot Start End Sectors Size Id Type
/dev/sdb1 1008 3907029167 3907028160 1,8T 5 Extended
/dev/sdb5 1071 5001128 5000058 2,4G b W95 FAT32
/dev/sdb6 5001192 3907026269 3902025078 1,8T aa nieznany
root@debian:/mnt#
root@debian:/mnt# smartctl -H /dev/sdb
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x1f75:0x0611 (0x006)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
root@debian:/mnt# smartctl -H /dev/sdb1
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
Short INQUIRY response, skip product id
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
root@debian:/mnt# smartctl -t /dev/sdb1
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=======> INVALID ARGUMENT TO -t: /dev/sdb1
=======> VALID ARGUMENTS ARE: offline, short, long, conveyance, force, vendor,N, select,M-N, pending,N, afterselect,[on|off] <=======
Use smartctl -h to get a usage summary
root@debian:/mnt# smartctl -a -d sat /dev/sdb
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital RE4-GP
Device Model: WDC WD2002FYPS-02W3B0
Serial Number: WD-WCAVY6878514
LU WWN Device Id: 5 0014ee 2b05e6a18
Firmware Version: 04.01G01
User Capacity: 2,000,398,934,016 bytes [2,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Nov 24 11:44:38 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: Przekroczony czas oczekiwania na połączenie
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (43080) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 436) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 1543
3 Spin_Up_Time 0x0027 236 232 021 Pre-fail Always - 10158
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 61
5 Reallocated_Sector_Ct 0x0033 196 196 140 Pre-fail Always - 28
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 094 093 000 Old_age Always - 4746
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 55
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 51
193 Load_Cycle_Count 0x0032 168 168 000 Old_age Always - 96253
194 Temperature_Celsius 0x0022 122 106 000 Old_age Always - 30
196 Reallocated_Event_Count 0x0032 172 172 000 Old_age Always - 28
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 22
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@debian:/mnt# pls help me"
Całkiem przystępny opis i do tego po polsku:
http://informatyka-porady.blogspot.com/2014/12/linux-smartmontools-smartctl-i-smartd.html