Witaj na Forum Linuxiarzy
Zanim zalogujesz się, by pisać na naszym forum, zapoznaj się z kilkoma zasadami savoir-vivre'u w wątku Administracja.
Wątki z problemami zamieszczone w dziale "Przywitaj się" oraz wszelkie reklamy na naszym forum będą usuwane.

Autor Wątek: OpenLinux - dlaczego nie działa GUI (logi)  (Przeczytany 442 razy)

Offline microsofter

  • Full Member
  • ***
  • Wiadomości: 216
  • Reputacja: 5
OpenLinux - dlaczego nie działa GUI (logi)
« dnia: Kwiecień 17, 2020, 05:41:44 pm »
Wątek jest wyszczególnieniem z tematu ,,Jak uruchomić GUI (pytanie nowicjusza)":
https://forum.linuxiarze.pl/index.php/topic,3684.0.html
Używam VMWare Workstation od kilku lat. Łącznie uruchomiłem pod nim już ponad 100 systemów komercyjnych (Windows, OS/2, prawdziwy Unix). Wszystkie działały sprawnie. Natomiast nie mogę uruchomić GUI pod żadnym systemem darmowym. Próbowałem FreeBSD i kilka wersji GNU.

Tak wygląda próba uruchomienia pulpitu w OpenLinux 1.3 pod VMWare workstation. Naturalnie wybrana grafika przy instalacji to VGA16:
https://naforum.zapodaj.net/cd9e7bb815a2.gif.html
XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.35 i686 [ELF]
Configured drivers:
  VGA16: server for 4-bit colour VGA (Patchlevel 0):
      ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c,
      ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c,
      ET4000W32p_rev_d, ET6000, ET6100, et3000, ncr77c22, ncr77c22e, ati,
      sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b,
      tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
      tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
      tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
      cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
      3dimage985, oti067, oti077, oti087, oti037c, cl6410, cl6412, cl6420,
      cl6440, generic
  MONO: server for interlaced and banked monochrome graphics adaptors
        (Patchlevel 0):
      hgc1280, sigmalview, apollo9, hercules
(using VT number 7)


Could not find config file!
- Tried:
      /root/XF86Config
      /etc/XF86Config
      /usr/X11R6/lib/X11/XF86Config.noname.nodomain.nowhere
      /usr/X11R6/lib/X11/XF86Config

Fatal server error:
No config file found!


When reporting a problem related to a server crash, please send
the full server output, not just the last messages

_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.xinit:  Connection refused (errno 111):  unable to connect to X serverxinit:  No such process (errno 3):  Server error.
W pierwszym temacie
1. Są proste w instalacji dystrybucji ("podaj dalej" ;)), które są tak prekonfigurowane, że po etapie bootowania przechodzi do tzw. Display Manager (Ekran logowania), gdzie całe Xy lub Wayland jest już podniesiony i pozostaje jedynie zalogować się i ewentualnie wybrać środowisko lub tryb jego pracy, jeśli się da.
2. W innych ów DM również można zainstalować i skofigurować oraz - zwykle jeszcze - należy taką usługę podnieść. Reszta jw.
3. X w ogóle nie służy podnoszeniu serwera grafiki tam, gdzie jest stosowany.
4. startx lub xinit wymagają niekiedy skonfigurowania zanim zostaną użyte.
Rozumiem, że chodzi o polecenie XF86Config? Po uruchomieniu jest taki komunikat
https://naforum.zapodaj.net/b99e32e8c0ac.gif.html
po czym zwis na czarnym ekranie.

OpenLinux 2.4 wcale nie startuje. Po prostu nie chce uruchomić się. Natomiast w 3.1 mamy takie coś:
https://naforum.zapodaj.net/0e544d54c86d.gif.html
13:59:16 noname crond[17313]: (CRON) STARTUP (fork ok)
13:59:27 noname kdm[17540]: Server for display :0 terminated unexpectedly: 1
13:59:28 noname kernel: Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
13:59:28 noname kernel: SMSC Super-IO detection, now testing Ports 2F0, 370 ...
13:59:28 noname kernel: Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
13:59:28 noname kernel: SMSC Super-IO detection, now testing Ports 2F0, 370 ...
13:59:28 noname insmod: Note: /etc/modules.conf is more recent than /lib/modules/2.4.2/modules.dep
13:59:28 noname insmod: /lib/modules/2.4.2/kernel/drivers/parport/parport_pc.o: init_module: Device or resource busy
13:59:28 noname insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
13:59:28 noname insmod: /lib/modules//2.4.2/kernel/drivers/parport/parport_pc.o: init_module: Device or resource busy
13:59:28 noname insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
13:59:28 noname insmod: /lib/modules//2.4.2/kernel/drivers/parport/parport_pc.o: insmod parport_lowlevel failed
13:59:28 noname insmod: Note: /etc/modules.conf is more recent than /lib/modules/2.4.2/modules.dep
13:59:28 noname kernel: lp: driver loaded but no devices found
13:59:28 noname kernel: Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
13:59:28 noname kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
13:59:28 noname insmod: Note: /etc/modules.conf is more recent than /lib/modules/2.4.2/modules.dep
13:59:28 noname kdm[17540]: Server for display :0 terminated unexpectedly: 1
13:59:31 noname last message repeated 3 times
13:59:31 noname kdm[17540]: Display :0 is being disabled (exit frequency too high)
13:59:32 noname kdm[17575]: Server for display :0 terminated unexpectedly: 1
13:59:36 noname last message repeated 4 times
13:59:36 noname kdm[17575]: Display :0 is being disabled (exit frequency too high)
13:59:37 noname kdm[17588]: Server for display :0 terminated unexpectedly: 1
13:59:41 noname last message repeated 4 times
13:59:41 noname kdm[17588]: Display :0 is being disabled (exit frequency too high)
13:59:42 noname kdm[17605]: IO Error in XOpenDisplay
13:59:42 noname kdm[17601]: Display :0 cannot be opened
13:59:43 noname kdm[17607]: IO Error in XOpenDisplay
13:59:43 noname kdm[17601]: Display :0 cannot be opened
13:59:44 noname kdm[17609]: IO Error in XOpenDisplay
13:59:44 noname kdm[17601]: Display :0 cannot be opened
13:59:45 noname kdm[17611]: IO Error in XOpenDisplay
13:59:45 noname kdm[17601]: Display :0 cannot be opened
13:59:46 noname kdm[17613]: IO Error in XOpenDisplay
13:59:46 noname kdm[17601]: Display :0 cannot be opened
13:59:46 noname kdm[17601]: Display :0 is being disabled (exit frequency too high)
13:59:47 noname kdm[17618]: IO Error in XOpenDisplay
13:59:47 noname kdm[17614]: Display :0 cannot be opened
13:59:48 noname kdm[17620]: IO Error in XOpenDisplay
13:59:48 noname kdm[17614]: Display :0 cannot be opened
13:59:49 noname kdm[17622]: IO Error in XOpenDisplay
13:59:49 noname kdm[17614]: Display :0 cannot be opened
13:59:50 noname kdm[17624]: IO Error in XOpenDisplay
13:59:50 noname kdm[17614]: Display :0 cannot be opened
13:59:51 noname kdm[17626]: IO Error in XOpenDisplay
13:59:51 noname kdm[17614]: Display :0 cannot be opened
13:59:51 noname kdm[17614]: Display :0 is being disabled (exit frequency too high)
13:59:53 noname kdm[17627]: Server for display :0 terminated unexpectedly: 1
13:59:57 noname last message repeated 4 times
13:59:57 noname kdm[17627]: Display :0 is being disabled (exit frequency too high)
13:59:58 noname kdm[17640]: Server for display :0 terminated unexpectedly: 1
14:00:01 noname last message repeated 3 times
14:00:01 noname crond[17654]: (root) CMD (/sbin/rmmod -a)
14:00:02 noname kdm[17640]: Server for display :0 terminated unexpectedly: 1
14:00:02 noname kdm[17640]: Display :0 is being disabled (exit frequency too high)
14:00:03 noname kdm[17655]: Server for display :0 terminated unexpectedly: 1
14:00:04 noname kdm[17661]: IO Error in XOpenDisplay
14:00:04 noname kdm[17655]: Display :0 cannot be opened
14:00:05 noname kdm[17663]: IO Error in XOpenDisplay
14:00:05 noname kdm[17655]: Display :0 cannot be opened
14:00:06 noname kdm[17665]: IO Error in XOpenDisplay
14:00:06 noname kdm[17655]: Display :0 cannot be opened
14:00:07 noname kdm[17667]: IO Error in XOpenDisplay
14:00:07 noname kdm[17655]: Display :0 cannot be opened
14:00:07 noname kdm[17655]: Display :0 is being disabled (exit frequency too high)
14:00:08 noname kdm[17668]: Server for display :0 terminated unexpectedly: 1
14:00:12 noname last message repeated 4 times
14:00:12 noname kdm[17668]: Display :0 is being disabled (exit frequency too high)
14:00:13 noname kdm[17681]: Server for display :0 terminated unexpectedly: 1
14:00:14 noname kdm[17687]: IO Error in XOpenDisplay
14:00:14 noname kdm[17681]: Display :0 cannot be opened
14:00:15 noname kdm[17689]: IO Error in XOpenDisplay
14:00:15 noname kdm[17681]: Display :0 cannot be opened
14:00:16 noname kdm[17691]: IO Error in XOpenDisplay
14:00:16 noname kdm[17681]: Display :0 cannot be opened
14:00:17 noname kdm[17693]: IO Error in XOpenDisplay
14:00:17 noname kdm[17681]: Display :0 cannot be opened
14:00:17 noname kdm[17681]: Display :0 is being disabled (exit frequency too high)
14:00:17 noname init: Id "gu" respawning too fast: disabled for 5 minutes
14:05:01 noname crond[28946]: (root) CMD (/sbin/rmmod -a)
14:05:19 noname kdm[28947]: Server for display :0 terminated unexpectedly: 1
14:05:23 noname last message repeated 4 times
14:05:23 noname kdm[28947]: Display :0 is being disabled (exit frequency too high)
14:05:24 noname kdm[28960]: Server for display :0 terminated unexpectedly: 1
14:05:28 noname last message repeated 4 times
14:05:28 noname kdm[28960]: Display :0 is being disabled (exit frequency too high)
14:05:29 noname kdm[28973]: Server for display :0 terminated unexpectedly: 1
14:05:30 noname kdm[28979]: IO Error in XOpenDisplay
14:05:30 noname kdm[28973]: Display :0 cannot be opened
14:05:31 noname kdm[28981]: IO Error in XOpenDisplay
14:05:31 noname kdm[28973]: Display :0 cannot be opened
14:05:32 noname kdm[28983]: IO Error in XOpenDisplay
14:05:32 noname kdm[28973]: Display :0 cannot be opened
14:05:33 noname kdm[28985]: IO Error in XOpenDisplay
14:05:33 noname kdm[28973]: Display :0 cannot be opened
14:05:33 noname kdm[28973]: Display :0 is being disabled (exit frequency too high)
14:05:34 noname kdm[28986]: Server for display :0 terminated unexpectedly: 1
14:05:38 noname last message repeated 4 times
14:05:38 noname kdm[28986]: Display :0 is being disabled (exit frequency too high)
14:05:39 noname kdm[29003]: IO Error in XOpenDisplay
14:05:39 noname kdm[28999]: Display :0 cannot be opened
14:05:40 noname kdm[29005]: IO Error in XOpenDisplay
14:05:40 noname kdm[28999]: Display :0 cannot be opened
14:05:41 noname kdm[29007]: IO Error in XOpenDisplay
14:05:41 noname kdm[28999]: Display :0 cannot be opened
14:05:42 noname kdm[29009]: IO Error in XOpenDisplay
14:05:42 noname kdm[28999]: Display :0 cannot be opened
14:05:43 noname kdm[29011]: IO Error in XOpenDisplay
14:05:43 noname kdm[28999]: Display :0 cannot be opened
14:05:43 noname kdm[28999]: Display :0 is being disabled (exit frequency too high)
14:05:44 noname kdm[29016]: IO Error in XOpenDisplay
14:05:44 noname kdm[29012]: Display :0 cannot be opened
14:05:45 noname kdm[29018]: IO Error in XOpenDisplay
14:05:45 noname kdm[29012]: Display :0 cannot be opened
14:05:46 noname kdm[29020]: IO Error in XOpenDisplay
14:05:46 noname kdm[29012]: Display :0 cannot be opened
14:05:47 noname kdm[29022]: IO Error in XOpenDisplay
14:05:47 noname kdm[29012]: Display :0 cannot be opened
14:05:48 noname kdm[29024]: IO Error in XOpenDisplay
14:05:48 noname kdm[29012]: Display :0 cannot be opened
14:05:48 noname kdm[29012]: Display :0 is being disabled (exit frequency too high)
14:05:49 noname kdm[29025]: Server for display :0 terminated unexpectedly: 1
14:05:53 noname last message repeated 4 times
14:05:53 noname kdm[29025]: Display :0 is being disabled (exit frequency too high)
14:05:54 noname kdm[29038]: Server for display :0 terminated unexpectedly: 1
14:05:58 noname last message repeated 4 times
14:05:58 noname kdm[29038]: Display :0 is being disabled (exit frequency too high)
14:06:00 noname kdm[29051]: Server for display :0 terminated unexpectedly: 1
14:06:01 noname kdm[29057]: IO Error in XOpenDisplay
14:06:01 noname kdm[29051]: Display :0 cannot be opened
14:06:02 noname kdm[29059]: IO Error in XOpenDisplay
14:06:02 noname kdm[29051]: Display :0 cannot be opened
14:06:03 noname kdm[29061]: IO Error in XOpenDisplay
14:06:03 noname kdm[29051]: Display :0 cannot be opened
14:06:04 noname kdm[29063]: IO Error in XOpenDisplay
14:06:04 noname kdm[29051]: Display :0 cannot be opened
14:06:04 noname kdm[29051]: Display :0 is being disabled (exit frequency too high)
14:06:05 noname kdm[29064]: Server for display :0 terminated unexpectedly: 1
14:06:09 noname last message repeated 4 times
14:06:09 noname kdm[29064]: Display :0 is being disabled (exit frequency too high)
14:06:09 noname init: Id "gu" respawning too fast: disabled for 5 minutes
14:10:01 noname crond[29079]: (root) CMD (/sbin/rmmod -a)
14:11:11 noname kdm[29084]: IO Error in XOpenDisplay
14:11:11 noname kdm[29080]: Display :0 cannot be opened
14:11:12 noname kdm[29086]: IO Error in XOpenDisplay
14:11:12 noname kdm[29080]: Display :0 cannot be opened
14:11:13 noname kdm[29088]: IO Error in XOpenDisplay
14:11:13 noname kdm[29080]: Display :0 cannot be opened
14:11:14 noname kdm[29090]: IO Error in XOpenDisplay
14:11:14 noname kdm[29080]: Display :0 cannot be opened
14:11:15 noname kdm[29092]: IO Error in XOpenDisplay
14:11:15 noname kdm[29080]: Display :0 cannot be opened
14:11:15 noname kdm[29080]: Display :0 is being disabled (exit frequency too high)
14:11:16 noname kdm[29097]: IO Error in XOpenDisplay
14:11:16 noname kdm[29093]: Display :0 cannot be opened
14:11:17 noname kdm[29099]: IO Error in XOpenDisplay
14:11:17 noname kdm[29093]: Display :0 cannot be opened
14:11:18 noname kdm[29101]: IO Error in XOpenDisplay
14:11:18 noname kdm[29093]: Display :0 cannot be opened
14:11:19 noname kdm[29103]: IO Error in XOpenDisplay
14:11:19 noname kdm[29093]: Display :0 cannot be opened
14:11:20 noname kdm[29105]: IO Error in XOpenDisplay
14:11:20 noname kdm[29093]: Display :0 cannot be opened
14:11:20 noname kdm[29093]: Display :0 is being disabled (exit frequency too high)
14:11:21 noname kdm[29106]: Server for display :0 terminated unexpectedly: 1
14:11:25 noname last message repeated 4 times
14:11:25 noname kdm[29106]: Display :0 is being disabled (exit frequency too high)
14:11:26 noname kdm[29119]: Server for display :0 terminated unexpectedly: 1
14:11:30 noname last message repeated 4 times
14:11:30 noname kdm[29119]: Display :0 is being disabled (exit frequency too high)
14:11:31 noname kdm[29132]: Server for display :0 terminated unexpectedly: 1
14:11:32 noname kdm[29138]: IO Error in XOpenDisplay
14:11:32 noname kdm[29132]: Display :0 cannot be opened
14:11:33 noname kdm[29140]: IO Error in XOpenDisplay
14:11:33 noname kdm[29132]: Display :0 cannot be opened
14:11:34 noname kdm[29142]: IO Error in XOpenDisplay
14:11:34 noname kdm[29132]: Display :0 cannot be opened
14:11:35 noname kdm[29144]: IO Error in XOpenDisplay
14:11:35 noname kdm[29132]: Display :0 cannot be opened
14:11:35 noname kdm[29132]: Display :0 is being disabled (exit frequency too high)
14:11:36 noname kdm[29145]: Server for display :0 terminated unexpectedly: 1
14:11:40 noname last message repeated 4 times
14:11:40 noname kdm[29145]: Display :0 is being disabled (exit frequency too high)
14:11:41 noname kdm[29162]: IO Error in XOpenDisplay
14:11:41 noname kdm[29158]: Display :0 cannot be opened
14:11:42 noname kdm[29164]: IO Error in XOpenDisplay
14:11:42 noname kdm[29158]: Display :0 cannot be opened
14:11:43 noname kdm[29166]: IO Error in XOpenDisplay
14:11:43 noname kdm[29158]: Display :0 cannot be opened
14:11:44 noname kdm[29168]: IO Error in XOpenDisplay
14:11:44 noname kdm[29158]: Display :0 cannot be opened
14:11:45 noname kdm[29170]: IO Error in XOpenDisplay
14:11:45 noname kdm[29158]: Display :0 cannot be opened
14:11:45 noname kdm[29158]: Display :0 is being disabled (exit frequency too high)
14:11:46 noname kdm[29175]: IO Error in XOpenDisplay
14:11:46 noname kdm[29171]: Display :0 cannot be opened
14:11:47 noname kdm[29177]: IO Error in XOpenDisplay
14:11:47 noname kdm[29171]: Display :0 cannot be opened
14:11:48 noname kdm[29179]: IO Error in XOpenDisplay
14:11:48 noname kdm[29171]: Display :0 cannot be opened
14:11:49 noname kdm[29181]: IO Error in XOpenDisplay
14:11:49 noname kdm[29171]: Display :0 cannot be opened
14:11:50 noname kdm[29183]: IO Error in XOpenDisplay
14:11:50 noname kdm[29171]: Display :0 cannot be opened
14:11:50 noname kdm[29171]: Display :0 is being disabled (exit frequency too high)
14:11:51 noname kdm[29184]: Server for display :0 terminated unexpectedly: 1
14:11:55 noname last message repeated 4 times
14:11:55 noname kdm[29184]: Display :0 is being disabled (exit frequency too high)
14:11:56 noname kdm[29197]: Server for display :0 terminated unexpectedly: 1
14:12:00 noname last message repeated 4 times
14:12:00 noname kdm[29197]: Display :0 is being disabled (exit frequency too high)
14:12:00 noname init: Id "gu" respawning too fast: disabled for 5 minutes
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.0.2c / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 15 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Apr 17 14:14:30 2020
(==) Using config file: "/etc/X11/XF86Config-4"
Parse error on line 11 of section Module in file /etc/X11/XF86Config-4
"EndSection" is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
Tak samo jest w 3.1 Workstation jak i Server. Zablokowanie procesu Gu pozwala na start systemu, ale bez GUI. Coś komuś mówią te logi?
Solaris by Sun Microsystems